Daily Site Problems: Concrete Pouring ke waqt aane wali 5 badi mushkilaat aur unka solution 🚧

Construction site par jab concrete pouring (casting) ka kaam chalta hai, toh sab kuch bahut fast hota hai. Ek choti si galti bhi poore structure ko weak kar sakti hai.

Aaj hum baat karenge un problems ki jo casting ke waqt aati hain aur unhe site par kaise handle karein.

---

1. Slump Loss (Concrete ka sukh jana)

Garmiyo mein ya RMC truck late hone se concrete sakht hone lagta hai.

Problem: Workers concrete mein upar se paani daal dete hain, jo galat hai.

Solution: Hamesha admixture (plasticizer) ka use karein. Dosage engineer check kare.

---

2. Honeycombing (Gitti dikhna)

Shuttering khulne par voids ya khali jagah dikhti hai.

Problem: Improper vibration ya congested reinforcement.

Solution:

• Needle vibrator ka proper use karein
• Cover blocks sahi lagayein

---

3. Segregation (Concrete ka alag hona)

Concrete ko zyada height se daalne par material alag ho jata hai.

Solution: Pouring height 1.5m se kam rakhein, chute ya pipe use karein.

---

4. Shuttering Leakage (Slurry ka behna)

Shuttering joints tight nahi hone par slurry leak hota hai.

Solution: Masking tape ya foam se joints seal karein.

---

5. Sudden Rain (Achanak barish)

Barish se fresh concrete damage ho sakta hai.

Solution:

• Tarpaulin ready rakhein
• Zyada barish me casting rok kar construction joint banayein

---

✅ Site Engineer Quick Checklist

Checkpoint	Action
Vibrator	Backup vibrator ready rakhein
Slump Test	Har truck check karein
Safety	Gumboots aur gloves ensure karein
Curing	Agle din se curing start karein

---

🎯 Conclusion

Site par problems aana normal hai, lekin ek accha Site Engineer wahi hai jo panic karne ke bajaye solution dhoonde.

Ye tips aapke daily site work ko easy aur professional bana denge.

---

💬 Aapka Experience

Kya aapne kabhi site par casting rukwayi hai? Comment me apna experience share karein.